Danh mục: Từ khóa: , Brand:

Dell PowerVault MD1200 (HDD 24TB)

The Dell™ PowerVault™ MD1200 direct-attached storage array is the second generation of our low-cost, high-capacity expansion enclosure that improves density, versatility, and performance1 to enhance support for mainstream and capacity-intensive applications.

Chia sẻ:

Hotline : 0936 362 158
VP HN: (024) 7305 0506
VP HCM: (028) 7308 0508

RAID Support

  • PERC H800 supports RAID levels 0, 1, 5, 6, 10, 50 and 60.


  • Drives1
    Up to twelve (12) hot-pluggable SAS Hard Disk Drives (HDDs) at 7.2K, 10K and 15K rpm and SAS Solid State Drives (SSDs)

Drive performances and capacities

3.5” 6Gbps SAS:

HDD 15K – 300GB, 450GB, 600GB
HDD 7.2K – 1TB, 2TB, 3TB, 4TB
HDD 7.2K NL-SAS 512e – 6TB, 8TB

2.5” 6Gbps SAS with 3.5” carrier:
HDD 10K – 300GB, 600GB, 900GB, 1.2TB 
HDD 10K 512e– 1.8TB
SSD – 400GB mainstream SLC
SSD – 200GB, 800GB value SLC 
SSD – 200GB, 400GB WI SLC
2.5” 12Gbps SAS with 3.5” carrier:
7.2K HDD NL-SAS 512e – 2TB
SSD – 200GB, 400GB, 800GB, 1.6TB MU MLC
SSD – 200GB, 400GB, 800GB WI MLC
SSD – 800GB, 1.6TB RI MLC
Maximum Capacity (per enclosure)
Up to 96TB when using 12 x 8TB NL-SAS 3.5″ HDDs 
Expansion Capabilities
PERC H810 Host-RAID adapter enables expansion to 8 enclosures (4 enclosures per port)

Support for the following configurations:

Unified mode (single path) for daisy chaining of up to 8 enclosures per PERC H810 (4 enclosures per port, single path)

Unified mode (redundant path) for daisy chaining up to 4 enclosures per PERC H810 (4 enclosures connected to both ports via redundant path cabling)

Split mode with dual Enclosure Management Modules providing direct connectivity to drives 0 through 5 and a separate connectivity to drives 6 through 11.

2 Enclosure Management Modules(EMM) provide redundant enclosure management capability

Back-Panel Connectors
SAS connectors (per EMM)
1 SAS (SFF 8088) “IN” connector for connection to the host
1 SAS (SFF 8088) “OUT” connector for expansion to an additional enclosure

Serial connector (per EMM)
1 6-pin UART mini-DIN connector (for factory use only)

LED Indicators
Front panel
1 two-color LED indicator for system status
2 single-color LED indicators for power and split mode

Drive carrier
1 single-color activity LED
1 two-color LED status indicator per drive

3 two-color LED status indicators: one each for the two EMM SAS ports and one for the EMM status
1 single-color Unit Identification LED for each EMM

Power supply/cooling fan module
3 LED status indicators for power supply status, power supply/fan fault and AC status

Two fully redundant power supplies; supports DC power
Wattage: AC – 600 W; DC – 700 W
Heat dissipation: AC – 2047BTU/hr; DC – 2388 BTU/hr
Voltage: 100-240 VAC, auto sensing; 48V DC
Frequency: 50/60 Hz
Amperage: 8.6 A at 100 V, 4.3 A at 240 V
Available Drive Power (per slot)
Supported drive power consumption (continuous): 
up to 1.16 A at +5V 
up to 1.6 A +12V

  • Height: 8.7cm (3.43 inches) 
    Width: 48.2cm (18.98 inches) 
    Depth: 59.4 (23.39 inches)
    28.39 kg (62.6 lb) (maximum configuration)
    8.84 kg (19.5 lb) (empty)

Environmental Operating Conditions
Operating: 10° to 35°C (50° to 95°F) with maximum temp gradation of 10°C per hour
Storage: -40° to 65°C (-40° to 149°F) with temp gradation of 20°C per hour
Supports Fresh Air cooling, up to 35 degrees Celsius

Relative humidity:
Operating: 8% to 85% (non-condensing) with maximum humidity gradation of 10% per hour
Storage: 5% to 95% (non-condensing)

Operating: -16 to 3048 m (-50 to 10,000 ft)
Storage: -16 to 10,600 m (-50 to 35,000 ft)

Operating System
Refer to RAID Card for details on supported Operating Systems: 

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Dell PowerVault MD1200 (HDD 24TB)”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *